A two component Multi polyester based filler appropriate for use on all metallic and wooden surfaces. An excellent filler that spreads smoothly, giving a pinhole free finish. Easily applied and extremely easy to sand using P80-P120 dry grit paper.
Two component high build primer suitable for all paint systems (synthetics - single coat or base coat). Can be applied over filled and well prepared old paint surfaces. Suitable for application over ABC and hard PVC plastic surfaces. It is cured with an isocyanate based BODY HARDENER (# 722 FAST - # 720 NORMAL - #721 SLOW) or BODY 725(#725) @ 3:1 ratio. It is diluted 10-15% with thinner (reducer) BODY ACRYL (#740 NORMAL - #741 SLOW). Applied by a spray gun of 1,5-1,8 mm nozzle diameter. Allow 20-30 min to dry @ 60ºC (140ºF ) panel temperature or 3 hours air dry @ 23 ºC (73ºF).
By using HB BODY PRO A715 turbo AX (#715) hardening time is reduced even more.
WARNING: BY USING HB BODY PRO A715 TURBO AX THE POT LIFE OF THE READY FOR USE MATERIAL BECOMES VERY SHORT. FOR THIS REASON THE MATERIAL MUST NE APPLIED IMMEDIATELY
A bituminous / rubber thixotropic coating that provides excellent anticorrosive and stone chip protection. Perfect adhesion with permanent elasticity. Applied on the underneath parts of the carbody only. Can be diluted with thinner (reducer) at 10-20%. Applied by brush or spray gun at a 5-6 bar air pressure. Cannot be overpainted.
Special formulated material with sound proof and a protective properties. Based on synthetic rubber. It protects the interior and lower automotive parts, providing scratch and stone chip protection. Available in Black - White – Grey shades.
Self adhesive masking tape based on impregnated, waterproof, low crepe paper. Resistant to external agents such as paint solvents. Resists to high temperatures of up to 80℃. Can be easily removed after use, without any adhesive residues being left behind. Available in 19mm, 25mm, 38mm and 50 mm (all x 50 yards ).
A two component polyester filler for metal, wood and polyester surfaces. A fine particle filler with good filling properties. Easy to sand even days after application. Fast drying and can be sanded with P80 - P150 grit paper for a perfect pinhole free finish.
Extra fine stopper/filler for minor imperfections on surfaces. Ensures a smooth surface and a perfect feather edge. Easy to sand with P150 - P400 grit paper to obtain a perfect pinhole free finish. Also suitable for plastic bumper repairs.
Two component polyester filler (putty) with excellent adhesion to plastic bumpers excluding PE (Polyethylene). Simply degrease using ANTISIL 770 (NORMAL) or ANTISIL 771 (FAST) and a non woven pad prior to application. Extremely easy to sand with P120-P240 grit paper for a perfect pinhole free finish. Does not clog sand paper. Excellent mechanical resistance due to its high elasticity.
Two component polyester filler (putty) with aluminium added to provide increased thickness and resistance to vibration. Suitable for both metal and wood surfaces. Dries quickly 20-30 min @ 23°C (73°F). Easy to sand with P80-P120 grit paper to obtain a perfect pinhole free finish.
One component nitrocellulose filler, ideal for finishing of small uneven surfaces. Suitable for application over polyester fillers, nitrocellulose - high build primers and can be painted over with all paint systems. Apply 3-4 light layers allowing 15 minutes between coats and can be sanded with dry or wet papers for a pinhole free finish.
Fiberglass 2K polyester filler for bridging and filling of cavities. Also suitable for filling over corroded surfaces. Easy to apply, dries quickly and is easy to sand with P80-P120 grit paper. Resulting in a high resistant and elastic surface.
A two component polyester filling compound, suitable for metallic, wooden and polyester surfaces. A fine particle filler, but with good filling properties. Dries quickly and sands easily with P80 - P120 grit paper for a perfect pinhole free finish.
Fast drying nitrocellulose primer suitable for application under Nitro, Synthetic or single coat acrylic paints. Applied in thin layers over sanded surfaces. Dries very fast (10-20 min) and can be sanded easily with water and P600-1000 grit paper.
High quality, 1K fast drying anticorrosive primer suitable for application over metallic and wooden surfaces. Excellent resistance to salinity, moisture and to severe weather conditions. Can be applied with a brush, roller or spray gun (1,8 mm nozzle diameter). It can be diluted 10-30% with nitro thinner (reducer) BODY ECO THINN (#767). ZINC AND LEAD CHROMATE FREE.
Fast drying 1K filling primer suitable for all kinds of paints (synthetic - single coat or base coat). Must be applied in thin layers (1,3 – 1,8mm) over sanded areas only. Can be sanded within 10-30 min. Must be diluted 50-100% with BODY ACRYL THINNER (REDUCER) (#740 NORMAL - #741 SLOW).
Quick drying acrylic texture, excellent coverage, primer/topcoat, suitable for use on all plastic surfaces bumpers etc. (excluding polyethylene).Gives a fine textured surface similar to the original bumper.Available in Black – Grey colour.
Quick drying acrylic primer/topcoat for plastic parts.Excellent coverage.Suitable for use on all plastic surfaces e.g. bumpers, moldings etc (excluding polyethylene). Available in black, grey, dark grey, light grey.