Car Paint Shop
SOFT PLUS ? multifunctional, the most universal polyester putty in our range of products. It combines the features of filling putties (good adhesion to various substrates, repair of large surface damages, easy application and sanding with coarse grain sandpaper) with the features of finishing putties (easy application in thin layers, filling of small defects, sanding with fine grain sandpaper). After application it forms a very smooth surface, which reduces time of sanding. VOC limit (cat. II/B/b) = 250 g/l VOC < 90 g/l
Autopaint, Filler & Putty
Lightweight multifunction putty. It contains modern fillers, which give fine product and very low density. This has resulted in easy application, great sanding characteristics and low curing shrinkage. Together with good adhesion, these characteristics make the putty suitable for application on small and large surfaces. Due to low destiny we recommended using larger quantity of hardener than in conventional putties. Amount of hardener is from 3 to 4%. VOC limit (cat.II/B/b) = 250 g/L VOC < 90 g/L
Autopaint, Filler & Putty
UNISOFT ? putty suitable for a very wide range of use. Applied in thick layers it is excellent for filling large cavities. It produces a soft surface, suitable both for manual and machine sanding. It has very good adhesion to various substrates, including galvanized steel. It is highly elastic, which minimises the risk of cracking, even when applied on large surfaces. Rapid curing reduces the time of repair. VOC limit (cat. II/B/b) = 250 g/l VOC < 90 g/l
Autopaint, Filler & Putty
UNI PLUS - basic putty suitable for a very wide range of use. It produces a soft sur face, suitable both for manual and machine sanding. It is easy to work even when applied on large surfaces. Its good adhe sion to various substrates (including galva nized steel) and high elasticity guarantee high quality of repair. VOC limit (cat. II/B/b) = 250 g/l VOC < 90 g/l
Autopaint, Filler & Putty
SPRAY ? spray applied polyester filler. It forms a perfect, smooth coat even when applied on a large surface. Minimum curing time is ca. 2 hours (it may be reduced by thermal treatment at max. temp. 60 C). It is suitable for machine or manual sanding with fine grade sandpaper. VOC limit (cat. II/B/c) = 540 g/l VOC < 150 g/l
Autopaint, Filler & Putty
FINISH ? finishing putty for knifing application. It is used for repairing small surfaces and final smoothing of surface before application of fillers. Fine grain fillers make it an excellent material for thin-coat application and filling of small holes and scratches. It may be sanded with fine grade sandpaper to obtain a very smooth surface. It also has a very good adhesion to various substrates, including galvanized steel. VOC limit (cat. II/B/b) = 250 g/l VOC < 90 g/l
Autopaint, Filler & Putty
BUMPER FIX ? putty for plastics. It has very high flexibility and excellent adhesion to most plastics (except for polyethylene and teflon). Satisfactory adhesion to polypropylene allows application of the product on non-primed substrates. VOC limit (cat. II/B/b) = 250g/l VOC < 90 g/l
Autopaint, Filler & Putty
FIBER MICRO ? glass fibre reinforced putty. Thanks to flexible polyester resins and short fibres it has higher elasticity than FIBER, maintaining high mechanical strength. Soft and easy sanding make it suitable for application even on large surfaces. It has good adhesion to various substrates, including galvanized steel. VOC limit (cat. II/B/b) = 250 g/l VOC < 90 g/l
Autopaint, Filler & Putty
ALU ? putty containing aluminium powder. It improves thermal resistance and provides excellent adhesion comparable with PROFICYNK. Its reduced shrinkage, as compared to typical putties accompanied by high elasticity makes this product suitable for repairing large areas. VOC limit (cat. II/B/b) = 250 g/l VOC < 90 g/l
Autopaint, Filler & Putty
PROFICYNK ? highest grade putty. It has excellent adhesion to various substrates and high thermal resistance. It has good adhesion to galvanized steel at elevated temperature. Other characteristics, including application, curing time, sanding and mechanical properties are similar to UNISOFT putty. VOC limit (cat. II/B/b) = 250 g/l VOC < 90 g/l
Autopaint, Filler & Putty
FIBER ? glass fibre reinforced putty. Thanks to a large quantity of long fibres the product has a very high mechanical strength and good filling properties. Its low flexibility and hard sanding limits its application to small surfaces. VOC limit (cat. II/B/b) = 250 g/l VOC < 90 g/l
Autopaint, Filler & Putty
LIGHT ? lightweight putty. It contains special fillers, which reduce density by ca. 40%, as compared to other putties. This has resulted in very good sanding characteristics and low curing shrinkage. Together with good adhesion, these characteristics make the putty suitable for application on large surfaces. Curing time is slightly longer than in the case of conventional putties. This product offers very good performance at a reasonable price. VOC limit (cat. II/B/b) = 250 g/l VOC < 90 g/l
Autopaint, Filler & Putty
PROTECT 300 is a two-component product for application with a spray gun. PROTECT 300 is a high quality grounding product. It is easy to use, guarantees good spreading and precise covering of the grounded surface. It quickly hardens through, even in a thick layer, it sands excellently. It is an ideal base that guarantees a perfect look of the varnish coat. It contains some active anticorrosive additives assuring very good protection against corrosion. VOC limit (cat. II/B/c) = 540 g/l (ready to apply mixture) VOC = 535 g/l
Autopaint, Filler & Putty
PROTECT 310 it is a two-component acryl filler for application with a spray gun. It is strong filled primer based on acrylic resin. Thanks to its high spraying viscosity it may be applied in very thick layers, perfectly filling even large scratches and surface irregu larities. It has very good adhesion to various substrates. Thanks to high quality resins and special additives it provides good anticorrosion pro tection and insulation between poly ester materials (putties) and acrylic paints. By mixing white with black colours any shades of gray may be obtained to match the topcoat colour. VOC limit (cat. II/B/c) = 540g/l (ready to apply mixture) VOC = 500 g/l
Autopaint, Filler & Putty
PROTECT 330 is acryl filler, which thanks to applying high quality resins and special additives provides good anti orrosion protection and insulation between polyester materials (putties) and acrylic paints. Protect 330 has very good adhesion to various substrates. Primer is in three colors: black, white and grey. By mixing these three colours in proper ratio, it is obtained primer providing the best hide power for enamel. VOC limit (kat. II/B/c) = 540g/l (ready to apply mixture) VOC =- 530 g/l
Autopaint, Filler & Putty
PROTECT 360 anticorrosive epoxy primer provides excellent protection of steel surfaces, thanks to high quality resins and active anti-corrosion additives. It is used for renovation of bodies of passenger cars, as well as heavily operated lorries or buses. It gives very good adhesion to various substrates and excellent sealing properties. It may be coated with top coats, also using wet-on-wet tech nique. Protect 360 can be applied in 1+1 ratio with Hardener H 5950 (wet on wet) or in 4+1 ratio with Hardener H 5960 with additional thinner in different ratio (10, 25 and 50%). Thanks to it different thicknesses of surface can be archieved. VOC limit (kat. II/B/c) = 540g/l (ready to apply mixture) VOC = 540 g/l (1:1) LZO = 382 g/l (4:1+10% THIN 860) LZO = 430 g/l (4:1+25% THIN 860) LZO = 490 g/l (4:1+50% THIN 860)
Autopaint, Filler & Putty
PROTECT 370 is a one-component, filling acryl filler. It is applied with a spray gun and in aerosol dispenser. Due to low adhesion to metals and no anticorrosion properties it is mainly applied on putties and old coatings. The main advantage of Protect 370 is short drying time (especially in aero sol), considerably shortening the repair time. Spray gun application: VOC limit (cat. II/B/c) = 540 g/l (ready to apply mixture) VOC = 540 g/l
Autopaint, Filler & Putty
NOVAKRYL 510 - acryl clearcoat with very high content of solid particles. It`s high gloss, UV stability and weather resistance guarantee excellent appear ance and durability of the coat. NOVAKRYL 510 is compatible with all basecoats available on the market. It can be applied on water basecoats. VOC limit (kat. II/B/d) = 420 g/l (ready to apply mixture) VOC = 415 g/l
Clear coat, Polish, Wax & Varnish
NOVAKRYL 530 MAT is a mat acryl clearcoat with high scratch resistance (SR). The coat has a high hardness and gives a highly hydrophobic coating. NOVAKRYL 530 MAT is compatible with most of commercial thinner and water-borne basecoats. It is available in the version with slow, standard and fast hardeners suitable for specific application conditions. It is possible to adjust the matt level by mixing NOVAKRYL 530 MAT with any coat from the Professional line. VOC II/B/e limit = 840g/l VOC = 545 g/l
Clear coat, Polish, Wax & Varnish
NOVAKRYL 570 - acryl clearcoat with Scratch Resistant properties. It is very easy in application, good flow and fast drying, which facilitates repair and shortens the time of car remaining in spray booth. Its hardness high gloss, UV stability and weather resistance guarantee excellent appearance and durability of the coat. NOVAKRYL 570 is compatible with all basecoats available on the market. We offer it with slow, standard and fast hardener, the choice depends on application conditions. VOC limit (cat. II/B/e) = 840 g/l (ready to apply mixture) VOC = 565 g/l
Clear coat, Polish, Wax & Varnish
NOVAKRYL 580 - colourless, acryl clearcoat with Scratch Resistant properties. It is characterised by high content of solid particles. Its hardness, high gloss, UV stability and weather resistance guarantee excellent appearance and durability of the coat. Applied in only one and a half coat, good flow and fast drying Novakryl 580 ensures effortless repair and short time of staying in spray booth. Novakryl 580 is compatible with all basecoats available on the market. We offer it with slow, standard and fast hardener, the choice depends on application conditions. It can be applied on water basecoats. VOC limit (cat. II/B/e) = 840 g/l (ready to apply mixture) VOC = 560 g/l
Clear coat, Polish, Wax & Varnish
NOVAKRYL 590 - acryl clearcoat with Scratch Resistant properties. It is characterised by high content of solid particles, higher flexibility and low tendency for running down. High gloss, UV stability and weather resis tance guarantee excellent appearance and durability of the coat. Applied in only one and a half coat, good flow and fast drying Novakryl 590 ensures effortless repair and short time in spray booth. Novakryl 590 is compatible with all basecoats available in the market. We offer it with slow, normal and fast hardener, the choice is depended on application conditions. It can be applied on water base coats. VOC limit (cat.II/ B/e) = 840 g/l (ready to apply mixture) VOC = 545 g/l
Clear coat, Polish, Wax & Varnish
GRAVIT 600 is onecomponent product based on synthetic resins. It forms durable, elastic layer resistant to damage by stones. It protects against corrosion, petrol, oil, water and salt. It does not contain any asphalt or bitumen. It can be coated with various topcoats. It absorbs sounds and vibration. Antigravel GRAVIT 600 is available also in spray version. VOC limit (cat II/B/e)=840 g/l VOC=560 g/l
antikor & cavity protection
GRAVIT 640 - is one component wax-lanoline product drying in a room temperature by evaporation of thinner. It perfectly protects against corrosion. It penetrates very good, forms flexible coating protecting against water and salt. It has good abilities to remove moisture from the substrate. GRAVIT 640 is available also in spray. VOC limit (cat II/B/e)=840 g/l VOC=540 g/l
antikor & cavity protection
GRAVIT 620 is one-component product which hardens in room temperature by evaporation of thinners. It forms a durable and very elastic seal. It doesn?t flow down, doesn?t leave any scratches and guarantees optimum adhesion to untreated and painted steel sheets. After drying can be painted with any acrylic lacquers. Should be applied with stiff brush. VOC limit (cat. II/B/e) = 840 g/l VOC = 420 g/l
antikor & cavity protection
New formula: • easier application • better adhesion to metal, glass and ceramic substrates • much better stability in the tube GRAVIT 630 is one-component, fast hardening product. As a result of chemical reaction with the air moisture it forms a tough and elastic coating. Thanks to thixotropic consistence it doesn?t flow down even in thick layer. It also has a low shrinkage and doesn?t crack. High elasticity and endurance enable using it to eliminate vibrations and strengthen the car structure. Sealer shows excellent adhesion both to untreated and painted steel sheets and it also can be painted with any acrylic products. It is resistant to water and weathering. The only exception is lower tolerance for UV light. VOC limit (cat. II/B/e) = 840 g/l VOC = 140 g/l
antikor & cavity protection
Quick-drying acrylic coat for renovation and repair of rims and caps made of steel and lightmetals. The coat has very good coating characteristics, durable gloss, resistance to water, petrol and atmospheric conditions. The product has the FANnozzle, which ensures that the application properties of the spray jet are similar to those of a conventional spray gun nozzle. CAUTION! Clean the valve after use. Turn the container upside down and spray for about 5 seconds until the valve is empty.
acrylic thinner, degreaser & spray
Quick-drying clearcoat with a high gloss, very good levelling and easy to polish. Makes a perfect finish for acrylic and cellulose coats. The product has the FANnozzle, which ensures that the application properties of the spray jet are similar to those of a conventional spray gun nozzle. CAUTION! Clean the valve after use. Turn the container upside down and spray for about 5 seconds until the valve is empty. Colours: Colourless
acrylic thinner, degreaser & spray
One-component, filling acrylic primer designed for levelling surfaces coated with putty and old paint coatings. Perfect for spot repairs. Very short drying time allowing for making quick repairs is the main advantage of the primer. The product has the FAN nozzle, which ensures that the application properties of the spray jet are similar to those of a conventional spray gun nozzle. CAUTION! Clean the valve after use. Turn the container upside down and spray for about 5 seconds until the valve is empty.
acrylic thinner, degreaser & spray
The product forms a durable, very flexible layer that is resistant to stone impact. Protects against petrol, oil, water and salt. It also has soundabsorbing and sound-proofing properties. The product is based on synthetic resins; it contains neither asphalt nor bitumen and can be coated with any clearcoats. Ecological product with reduced solvent content. CAUTION! Clean the valve after use. Turn the container upside down and spray for about 5 seconds until the valve is empty.
acrylic thinner, degreaser & spray
The product forms a durable, flexible and fine-grained layer that is resistant to stone impact. Protects against petrol, oil, water and salt. It also has sound-absorbing and sound-proofing properties. The product is based on synthetic resins; it contains neither asphalt nor bitumen and can be coated with any clearcoats. The product has the FAN nozzle,which ensures that the application properties of the spray jet are similar to those of a conventional spray gun nozzle. CAUTION! Clean the valve after use. Turn the container upside down and spray for about 5 seconds until the valve is empty.
acrylic thinner, degreaser & spray
Wax-based preservative for anti-corrosion protection of closed sections in the car body. Resistant to atmospheric factors and to weak acids and bases. It has good penetration (reaches inside sections) and gives a tight layer which protects against water and salt. The kit includes an adapter for directly applying the preservative into closed sections through their process openings. CAUTION! Clean the valve after use. Turn the container upside down and spray for about 5 seconds until the valve is empty. Colours: Colourless
acrylic thinner, degreaser & spray
Quick-drying, colourless primer that increases the adhesion of acrylic primers, acrylic and polyurethane coats for different substrate types, especially plastic (including polypropylene and its mixtures). The product has the FAN nozzle, which ensures that the application properties of the spray jet are similar to those of a conventional spray gun nozzle. CAUTION! Clean the valve after use. Turn the container upside down and spray for about 5 seconds until the valve is empty.
acrylic thinner, degreaser & spray
Quick-drying decorative acrylic coat with very good covering properties, of a fine-grained texture imitating plastic, designed for painting wooden, metal and aluminium surfaces as well as old paint coatings and polyester laminates. The product has the FAN nozzle, which ensures that the application properties of the spray jet are similar to those of a conventional spray gun nozzle. CAUTION! Clean the valve after use. Turn the container upside down and spray for about 5 seconds until the valve is empty.
acrylic thinner, degreaser & spray
THIN 850 is a mixture of solvents giving a product applied for thinning all fillers and acrylic lacquers. It occurs in three versions: fast, standard and slow, which allow to use appropriate thinner depending on temperature of work and size of repair.
acrylic thinner, degreaser & spray
THIN 870 is universal thinner for basecoats. It is compatible with majority basecoats available on the market.
acrylic thinner, degreaser & spray
PLUS 780 - mixture of organic solvents which allows a fast and thorough cleaning of the surface from different contaminations, also from greases, oils, silicones etc. VOC limit (cat. II/B/a) = 850 g/l (ready to apply mixture) VOC = 750 g/l
acrylic thinner, degreaser & spray
PLUS 750 is a product significantly short ening the drying and hardening time of two-component acrylic and polyurethane products. It is recommended to use espe cially in low temperature and high air humidity. In NOVAKRYL acrylic clearcoats identical effects are achieved while applying fast hardeners.
acrylic thinner, degreaser & spray
LUS 760 is designed to prevent the formation of the silicone craters (?fish eyes?) which can occur as a result of silicone and grease remaining residue
acrylic thinner, degreaser & spray
PLUS 770 is a plasticizer for acrylic and poly urethane products designed mainly for application on to car body parts made of plastics. It prevents cracking and chipping of the fillers and topcoats on elastify, defor ming elements. It may be used to elasticity of topcoats on elements exposed to damage by stones (e.g. front part, bonnet).
acrylic thinner, degreaser & spray
FLASH 900 - structure topcoat. Onecomponent thermoplastic product applied with a spray gun or in aerosol dispenser. It is fast drying product with very good hiding power. FLASH 900 is characterized with special texture surface which simulates plastic. It is also available in aerosol. Spray gun application: VOC limit (cat. II/B/e) = 840 g/l LZO = 680 g/l
masking tape, protective film & cellophanes
PLUS 700 is a 1K product for increasing adhesion of polyurethane and acrylic pro ducts to various surfaces, mostly for plastics (also for polypropylene and its copolymers). It is also supplied in aerosol package PLUS 700 SPRAY.
masking tape, protective film & cellophanes
PLUS 710 ? repair box which consist of polyester resin, hardener and glass fibre mat. It forms rigid laminate with a very good mechanical strength and it may be used for repairing large damages (e.g. caused by corrosion). It can be used for repairing metal or plastic surfaces. When cured, it may be sanded and coated with any polyester putties, to achieve enough smooth surface.
masking tape, protective film & cellophanes
PLUS 720 is a product for manual application. It contains unsaturated poly ester resin with suitable catalysts. The 50% paste of benzoyl peroxide should be used as hardener (Novol Art. No. 5022). Polyester Resin is suitable for repairing holes and rust damages in car bodies, as well as for laminating yachts, boats and caravans. Obtained coat has an excellent adhesion to the substrate. It is the same material as in the repair box but it is supplied in bigger containers. Compatible with any type of glass fibre mat or woven roving.
masking tape, protective film & cellophanes
Intended for laminating with polyester resin. Several sizes varying in thickness (gram per square metre) are offered. Glass mat guarantees an even reinforcement of the lamination in all directions.
masking tape, protective film & cellophanes
Duct tape on a paper basis with higher strength parameters and bonding, and serves to protect the surfaces from time masking paint, repair, lacquer work, etc. Tape perfectly kept on rough surfaces. The main advantage of tapes on smooth and flat surfaces to provide a clean edge when painting works. Withstand temperatures up to 80ºC. Type Package (pcs.) Article No 19 mm 48 39205 25 mm 36 39206 30 mm 32 39207 38 mm 24 39208 50 mm 24 39209
masking tape, protective film & cellophanes
Protective film PE-HD 7 um - protects against paint, dust and moisture. Very strong.
masking tape, protective film & cellophanes
HDPE film with a new generation perpendicular to the fiber direction. Protects against paint, dust and moisture.
masking tape, protective film & cellophanes
Polyurethane rollers for automotive masking gaps and openings between the doors, engine lid, tailgate, etc. It is easy to take the form of painted elements, so you can use them in all kinds of vehicles. Using rollers saves time and improves the quality of their work, protecting the door gasket from dirt and avoiding clear boundaries coloring. Type Package (pcs.) Article No 13 мм/20 мб 1 39273
papers,foam tape, sponge & discs
Polishing sponges are used for polishing and sanding varnish coats of various types. An impressive polishing effect is achieved by the high quality of material the sponge is made of. The foam structure allows keeping water inside, which accelerates the absorption of heat from the polished surface. Depending on the operation being performed, it is possible to select a sponge of an appropriate hardness (hard, medium and very soft). Polishing sponges can be used together with pneumatic or electric driven polishing machines. They enable both dry andwet sanding within the speed range of 600 to 2000 rpm at most without loading. Available with three types of threads: M14, M16 and with a sticker.
papers,foam tape, sponge & discs
Leblequja
Autopaint, Filler & Putty